- Fruit Picker – Model 1 :
Take a 2 litre plastic bottle. Remove any labels or stickers on it.
Make markings at the base of the bottle. Mark a cross at the base to divide it into 4 equal flaps. Carefully cut it out with a saw blade or hot knife. You should get 4 equal flaps. Then make holes on each flap. Make holes near the bottle neck exactly in line with the bottom flap holes. This is important for equal opening of flaps for fruit picking.
Now take some nylon strings like these. Fix one end of the string to the flap hole by tying a knot and take out of the bottle mouth through this other hole. Do this for the remaining three flaps. Tie all four strings together. Check the movement of the flaps as you pull the string knot. Adjust accordingly if any issue.
Optionally you can paint and decorate the bottle as per your wish. Now take two pvc pipes. One is a 3/4th inch diameter pipe – the length depends on the height of the trees. Another pipe about 1 foot long and 1 inch diameter. The smaller diameter pipe must slide easily into the larger pipe. Now tie another large string to this junction and bring it out through both the pipes. Fix the pipe to the bottle opening with screws.
At the lower end of the pipe put a bottle cap with the string out through a hole in the cap. Tie a knot to prevent string slipping out.
Your fruit picker is ready to use. Just slide the bottom pipe outwards to open the flaps and pick fruits.
- Fruit Picker Model 2:
Take a 2 litre plastic bottle
Remove any labels or stickers on it.
Mark a circle with a diameter of about
3 to 5 inches depending on the fruit you wish to pick.
Mark a beak on the circle towards the bottom of the plastic bottle.
Cut this out carefully to create a hole of this shape.
Fix the bottle to a pole or a pvc pipe of your desired length. Your simple fruit picker model 1 is ready to pick fruits.
- Air Pruning Pot:
Air pruning means when root tips are exposed to air, the root tips are effectively “burned” off, causing the plant to constantly produce new and healthy branching roots. promoting more branching of roots. If roots are not exposed to air, they continue to grow around the container in a constricted pattern making them root bound. Hence air pruning promotes better growth of plant within a limited space.
To build an air pruning pot you need a larger plastic bottle like atleast a 5 litre can. Remove any labels or stickers. You also need a pvc pipe of about 1 inch diameter and 1 foot height. Mark a circle on the bottle cap and cut it out. This is to insert the pipe through it. Make multiple tiny holes on the pipe. Any number of holes, the more the better. Put a cap at the bottom of this pipe. Take another smaller plastic bottle. Mark and and cut out a funnel. Fix this funnel to the upper end of this pipe. Screw it tightly.
Now cut a small window of any shape on the bottle. Then make multiple holes to insert your cuttings over the bottle below the level of this open window. Insert the pipe into the bottle and cap it. Add potting mix into the container. Make sure it contains atleast 30 to 40 percent compost. Your air pruning pot is ready. Now you can insert some mint cuttings into these holes. You can water every alternate day through the top funnel. You should see nice and fast mint leaves growing in about 2 weeks using the principle of air pruning.
- Easy Plant Cloner:
You can root your cuttings faster using this simple plant Cloner. Take any plastic bottle. Remove any labels and stickers. Punch multiple holes around the bottle, large enough to insert cuttings easily. Take some of your plant cuttings. Make sure you make a cut at an angle of about 45 degrees for faster rooting. Insert the cuttings into the holes. You can tape the cuttings to hold in place or tie a string around the bottle to hold the cuttings. Pour water into the bottle. Add a little bit of rooting hormone powder if you have. You can also add about half a tablet of Aspirin 350 mg dispersible tablet to induce faster rooting. If you want to further accelerate the rooting process, place air stones into the water and connect to an aquarium pump. Switch it on for few minutes for atleast twice daily. This oxygenation helps promote rooting faster. We have made similar advanced Cloners earlier using the principles of hydroponics. You can check HERE.
Simplest method of slow drip irrigation is using one bottle per container. Just make a tiny hole into the cap. Full the bottle and insert into the pot for vacation watering of already 7 days. Make sure you make a small hole at the top of the inverted bottle for drip to flow through.
Another alternative is to use these little bottle attachments with a drip control knob to adjust the number of drops per minute. Just fix it to the bottle and insert it and adjust the drip knob.
- Easy Plant Watering Systems.
Model 1: this nozzle can is recommended for your expensive succulent plants for careful watering without wetting the leaves and thus avoid fungal rot. Take any plastic bottle. Make a hole in the cap and fix a pipe into this hole and glue it from the inner side.
Model 2: this is just a simple shower bottle. Make multiple tiny holes in the bottle cap. That’s it. This is especially useful to water your seeds and seedlings and avoid heavy pressure of your garden hose damaging the seeds or the little seedlings.
- Easy Spray Bottle:
Model 1: take any plastic bottle and fix this type of simple hand pressure trigger nozzles to spray pesticides or foliar feeds on your indoor or outdoor plants.
Model 2: you can also attach an adjustable pressure nozzle or pump type of nozzle easily available online at amazon.
- Ring Guard:
Cut out few rings like these from plastic bottles. Use these around seeds and seedlings to prevent Slugs and Snails crossing over and eating your little plants.
- Mini Greenhouse:
Cut the tops off the plastic bottles. Remove the caps and cover these over seeds. This creates a mini greenhouse effect with nice humidity to germinate seeds faster.
- Easy Funnel:
Cut the tops off the plastic bottles as done in the previous hack. This is an easy funnel to transfer either seeds into a container or potting mix or even watering, mixing pesticides and so on.
- Self-Watering Pot:
You need one large plastic bottle. Make the markings and cut it through. You get two pieces. The bottom one is the water reservoir and the upper part is the actual pot to grow plants or seeds. Optinally you can paint this for good looks. Now take a piece of cotton rope. Make two holes in the bottle cap and insert the cotton wick through it. The lower end of the wick should be placed in the water reservoir.
You have two cotton wicks now. Now fill with some potting mix to about half and bury one wick. Then add more potting mix and then bury the other wick. You can plant seeds or small plants into this. Whenever the soil gets dry it will suck the water through the string and keep the soil moist.
12. Plant Labels:
Just cut some strips off the plastic bottle and use them to label your seeds or plants.
- Seed Storage:
Plastic bottles are excellent for storing your left-over seeds. Just pour the seeds in a bottle and close the cap. Make sure you place a small sachet of a silicon desiccant for any moisture absorption to prevent fungus.
- Bird Water Feeder:
Take a plastic plate or a small tray. Fix the bottle cork to the center of this tray. Bolting this is a good idea to make it sturdy. Also try to prevent any leaks by sealing with glue. Make holes like this near the bottle mouth. Fill the bottle and cork the tray to the bottle and invert this set up. You can hang this simple DIY water feeder for birds in your garden using some strings and attract beautiful birds to your garden.
- Easy Planters:
Model 1: For growing Greens. Take a large bottle and cut out horizontally. You get a wider container for growing your greens. Fix a cap at the bottom with the help of some screws. Optionally Paint it or decorate it as per your wish. Make few drainage holes at the bottom. Fill it with potting mix and plant your seeds.
Model 2: Cut a bottle near its base like about 5 to 6 inches from the bottom. Optionally pain it or decorate it as per your wish. Make some drainage holes. Fill it with potting mix and grow seeds or some small plants.
If you are interested in learning gardening stuff, please subscribe to my channel HERE.
Pruning means cutting or trimming the plant organs like branches, stems or even leaves for the sake of your plants health and sometimes to maintain plant shape and form. It is a very important task in gardening specially if you want your plants to perform well like to promote growth and flowering or fruiting. Another advantage of pruning is it allows you to remove the damaged or infected branches and leaves which can further spread and cause more damage.
In this Article, we will precisely look into many questions about plant pruning like:
a) When to prune which plants.
b) Types of Pruning
c) How to Prune and Why?
d) Pruning Tools
e) And many other concepts and tips on pruning.
PLANT SURGERY COMPARISON:
Before we proceed with these topics, first of all its important to know that pruning or cutting is actually wounding your plant. So doing it properly is really important. Pruning is actually a Plant Surgery similar to human or animal surgery, done either to save a plant from disease and also to make it look neat and good. Like the surgical wound, pruning also induces a wound or injury at the point of incision and this wound has to heal properly.
So Lets begin:
1. When to prune which plants? Let me start with a comparison. The best time to perform a surgery on a person is when they are in sleep, that’s during anaesthesia. This is the same for plants as well. As a general rule for most plants including flowering and fruiting plants they need to be pruned, specially hard pruning to be done while they are in a period of dormancy (that’s when they are asleep or inactive). This usually falls in late winter through early spring like in the month of January depending on your climatic zone. Another reason to perform this surgery in winter is the healing of wound is better in this cold season due to scientific reasons.
But some other plants need to be continuously pruned or trimmed I mean deadheaded or soft pruned, to maintain growth and flowering. We shall discuss this shortly.
Also remember to disinfect the cutting tools before your start snipping your plants. You can wipe the blades with any household disinfectant or you can also use hydrogen peroxide 3 or 6 percent and this is easily available at your local medical store.
2. Types of Pruning for house plants? Here we will learn Hard Pruning, Soft Pruning, Rejuvenation Pruning, Dead Heading and many other useful tips.
First we will start with:
Hard Pruning and Soft Pruning:Hard pruning or Annual Pruning as I discussed earlier is done in the dormant or inactive growth period of a plant during the late winter or early spring. In hard pruning, we cut off most of the plant stems and branches, atleast 50 percent to promote all new productive plant growth in the growing season.
Where as Soft Pruning can be performed any time of the year. Here we just trim the plant to onethird to half, the best example is pruning roses. This also includes dead heading. Deadheading means removal of dead or dried flowers from a plant which has just flowered. Sometimes it has to be a constant process and this diverts the plant energy into new growth and more flowering rather than drying up and consuming this energy into the seed formation process.
3. How to Prune? And Types of Pruning Cuts?
We will learn two important cuts here: Heading and Thinning Cuts:
Heading is the process of cutting or trimming branch tips, The cut is made anywhere on the branch or stem just half an inch above a node where it produces multiple branching usually two branches and this process makes your plant more bushy in the long run.One very important tip here:The cut is to be made at an angle of 45 degrees to allow water to run off. Because if a flat cut is made, water can stay on top of the wound which increases the chances of fungal or bacterial infection. Its also a good idea to Seal the wound with some stuff like wax or an antifungal powder or anything – even some recommend fevicol paste. If you can buy a tree paint or any commercially available pruning sealer, that’s still better. Some experts say its better to leave it open and let the plant heal itself specially for larger trees.
Thinning is the process of removing entire branches from a main stem by making a cut at its collar or just outside of the collar. Collar is the area where the branch connects with its main stem. Thinning helps sunlight to penetrate to interior foliage and promotes good air circulation and thus avoids fungus and bacterial growth.
If you are not sure how to and when to prune a particular plant, I still suggest you to atleast perform soft pruning atleast once in its growth cycle.
Regarding Choosing the right Pruning Tools, You can check that HERE.